PLANT NAME: ERDEMIR			LOCATION: EREGLI, TURKEY
TMP CAPACITY			250,000 TONNES FROM 2004 INC 50,000TONNES TFS
RATIO SR/DR
TEMPER CAPABILITY			SR, DR, BA, CA
OUTPUTS
TINPLATE			188,000 TONNES 2003
ECCS			4,200 TONNES 2003
BLACKPLATE SALE
DWI BEV
DWI FOOD
EXPORTS			NONE
PICKLER MANUFACTURER
ACID/ RECOVERY			SHALLOW BATH HYDROCHLORIC ACID
CAPACITY			COUPLED TO 4 STAND SHEET MILL
CAR/PIT ACCUMULATOR			CAR
SPEED			CAPACITY 1.5M TPY
AGE
PRIMARY MILL MANUFACTURER
CONTINUOUS ?			NO
NO. OF STANDS/ HIGH			5 STAND 4 HIGH
MAX SPEED (M/MIN)
CAPACITY (T/WEEK)			400,000 TPY
LAST UPGRADE- RESULT
AVERAGE % REDUCTION			85/92 FOR TINPLATE
THICKNESS CAPABILITY/ OFFERED.	0.22MM MIN.
MAX TINNED WIDTH OFFERED		965MM
MAX COIL WT.			13 TONNES
BATCH ANNEALING/ CLEANING			NKK – 1999 300,000 TPY CLEANING
MAX COIL WT.			23.5 TONNES 1200MM WIDE
MAX O/D
GAS
CONTINUOUS ANNEALING
TYPE (CAL/CAPL)			NEW LINE 2003
TECHNOLOGY			KAWASAKI CAPL
SPEED MAX. / AVERAGE
CAPACITY
AGE
TEMPER MILL / DR MILL			TM 2 STAND 4 HIGH CONVERT TO DR 2003
MANUFACTURER
SPEED
MAX WIDTH			965MM
WET/DRY			WET/DRY
LAST UPGRADE - RESULT
OUTPUT (T/HR)			300,000 TPY
COATING LINE			DUAL
MANUFACTURER / DATE			MARUBENI 1999
TYPE (FERROSTAN ETC)			MSA / NKK
LOOPING TOWER/SIDE TRIM			EE-
SPEED MAX.			50 / 457 M/MIN
COATING WT@ MAX SPEED
COATING WT RANGE			11.2
REFLOW TYPE
TENSION LEVELLER ?			YES
INSPECTION			AUTO UNILUX
THICKNESS RANGE			0.10 – 0.60MM
WIDTH RANGE			508 - 1,050 MM
CAPACITY			250,000TPY

CUT UP LINE: NEW CUT UP LINE SUPPLIED BY LITTELL IN 1999. CUT LENGTH 450 – 1068MM PACKING SHEET

PACKING COIL 20.5 TONNES MAX.

COMMENTS: MOST MATERIAL USED IN TURKEY –FEW EXPORTS.

1998 TINPLATE EXPANSION - CLEANING LINE (300,000 TPY), TINNING LINE AND CUT UP LINE. TINNING / TFS LINE WAS SUPPLIED BY NKK, MARUBENI, MITSUBISHI ELECTRIC, & ITAM. STARTED UP JANUARY 2000, USING MSA ELECTROLYTE. CAPACITY 250,000 TPY, TOTAL COST, INCLUDING CLEANING LINE (300,000TPY) AND CUT UP LINE (100,000TPY) WAS Y10BN. CA LINE SUPPLIED BY MARUBENI IN 1993 MOSTLY USED FOR SHEET.

PLANS ANNOUNCED IN APRIL 2000 FOR NEW CA LINE FOR TIN MILL. CONTRACTS EXCHANGED WITH KAWASAKI AND ITOCHU FOR $43M. LINE TO START AT END OF 2003.

EXPANSION COMPLETED IN 2003 INCLUDED UPDATE 5 STAND COLD REDUCTION MILL, AND WIDEN IT TO GIVE 1200MM CAPABILITY; CONVERT THE TEMPER MILL TO PRODUCE BLACKPLATE 0.12MM THICK. THE MILL IS ALSO ABLE TO TEMPER SHEET, UP TO 1MM THICK. COST WAS $32M. 2004 PLAN TO BUILD SECOND TINNING LINE STILL IN ABEYANCE.

UP TO 2006 THE MAJORITY OF SHARES WERE IN PRIVATE HANDS, WITH THE GOVERNMENT HOLDING 49.66%. THIS WAS SOLD TO OYAK, PENSION FUND FOR €2.96BN. ARCELOR’S J/V WITH THE FUND WAS REJECTED BY THE COMPETITION AUTHORITIES., BUT ERDIMIR HAS A 25% HOLDING IN ARCELOR MITTAL’S AMBALAJ SERVICE CENTRE, GIVING ACCESS TO ARCELOR MITTAL’S TECHNOLOGY, AND COOPERATION ON SALES TO THE MIDDLE EAST.

HOT STRIP MILL UP-RATED BY DAVY 1993 - 1996. NEW F7, COIL BOX, ROLL BENDING ON F5, 6, & 7. CAPACITY EXPANDED FROM 1.95M TONNES TO 3.5M TONNES. "DAVY REPORT WORLD CLASS QUALITY".

2003. ERDIMIR

OUTPUTS (TONNES)

	TINPLATE	TFS	TOTAL	IMPORTS
1989	101,000
1990	104,000
1991	93,000
1992	107,000
1993	90,000
1994	109,000
1995	81,000
1996	100,000
1997	91,000
1998	80,352			133,000
1999	73,182
2000	133,714	4,078	137,792	112,000
2001	78,183			118,000
2002	146,000			118,000
2003	188,500	4,200	192,700
2004	219,000		219,000
2006E	220,000		220,000

Address:

Works.

Eregli Demir ve Celik Fabrikalari. TAS. (Eregli Iron & Steel Works Inc.)

Karadeniz, Eregli Turkey.

Tel: +90 372 323 2500 Fax: +90 372 323 7522

This is a sample entry for one mill, 2009 data is now out!, as you can see from the index there are many more :

To order a copy or to find out more contact progers@gobalnet.co.uk

To go back to home page.